Appearance
Connect your domains
Point each parked domain at us in one of two ways: nameservers (recommended, one change per domain) or a few CNAME records (if you want to keep your own DNS). To see the exact values for your portfolio, open Domain parking and choose Connect domains on the portfolio. Then find your registrar (the company you bought the domain from) in Registrar guides for the exact clicks.
Nameservers or CNAME records?
- Nameservers (NS mode): nameservers decide which company answers for your domain on the internet. You replace them with the two names we give you, and we run the domain's DNS from then on. There is nothing else to manage, and most registrars let you change many domains at once.
- CNAME records (CNAME mode): you keep your current DNS host and add a few records there. Use this if you bought the domain at Cloudflare (Cloudflare Registrar can't use other nameservers), or if you want to keep the domain's email or other records.
Nameservers are the easier choice. A domain uses one mode; we tell you which one when we check it.
Before you switch
Both ways: wait for the approval email before you change anything. A domain switched early stays offline and shows Waiting for approval.
Nameservers only:
- Turn off DNSSEC at your registrar first. DNSSEC is a security setting; turning it off removes the domain's DS record. If you can't find a DNSSEC setting, it is most likely already off. A domain with DNSSEC still on stops working when you switch.
- Turn off URL forwarding (also called redirects) on the domain.
- Remove the old parking nameservers (Sedo, Bodis, ParkingCrew and others). The domain row names the parker it found.
- Check email first. Email stops working on a parked domain, so do not park a domain whose mailboxes you use.
- Expect a short offline window. From the switch until the domain shows Live (usually under an hour), the domain shows nothing.
CNAME records only:
- Your email and DNSSEC keep working, and nothing goes offline if you add the records in the order below.
- If you forward the bare domain (without
www) tohttps://www.<your domain>, keep that forwarding. Turn off any other forwarding or redirect on the domain.
Nameservers (NS mode)
Set exactly two nameservers, and remove every other one:
ns1.example-dns.netns2.example-dns.org
These names are placeholders. Copy the exact two names shown in your dashboard for this portfolio. The two names sit on two different domains on purpose, so one provider's problem cannot take both down. Enter both exactly as shown, and remove any other nameserver entry. Your registrar may call this Custom DNS, Custom nameservers or I'll use my own nameservers.
CNAME records (CNAME mode)
| Host | Type | Value | Keep it? |
|---|---|---|---|
_acme-challenge.www | CNAME | example-code.acme.example-dns.net | Yes, for as long as the domain is parked |
_acme-challenge | CNAME | example-code.acme.example-dns.net | Yes, only if the bare domain points at us |
www | CNAME | parking-edge.example-dns.net | Yes |
@ (the bare domain) | ALIAS, ANAME or flattened CNAME to parking-edge.example-dns.net | Yes, where your DNS host offers it. Otherwise forward the bare domain to https://www.<your domain> | |
@ | CAA | 0 issue "letsencrypt.org" | Only if the domain already has CAA records |
The names above are placeholders. Copy the exact values shown in your dashboard for this portfolio.
How to read the table:
- Your DNS host may call Host "Name", and Value "Points to" or "Target".
@means the domain itself. - Type the host exactly as shown, for example
_acme-challenge.www. Most DNS hosts add your domain to the end by themselves, so don't type it. - ALIAS, ANAME and flattened CNAME are three names for the same thing: a CNAME-style record for the bare domain. Use whichever your DNS host offers.
- A CAA record lists the companies allowed to issue the domain's security certificate. Add ours only if the domain already has CAA records; if it has none, skip that row.
Add them in this order, so the domain never goes offline:
- Add the
_acme-challenge.wwwrecord. Add the_acme-challengerecord too if the bare domain will point at us with an ALIAS, ANAME or flattened CNAME. If you forward the bare domain tohttps://www.<your domain>instead (GoDaddy, IONOS, NameSilo and other DNS hosts with no ALIAS), skip it. When the domain row shows Ready — now point www, we have its security certificate. - Add the
wwwrecord (if awwwrecord already exists, edit it instead of adding a second one), then the bare domain record or the forwarding.
Keep in mind:
- Keep the
_acme-challengerecords for as long as the domain is parked. Renewals and the daily check use them. Removing one gets a warning email, and then the domain stops. - Set every record to DNS only (grey cloud). A proxied record fails our check. In Cloudflare, click the orange cloud next to the record so it turns grey.
- A flattened apex may serve all visitors from one region.
wwwis not affected.
How long it takes
- New domains are checked every 2 minutes for the first hour, every 15 minutes for two days, then hourly. The Connect domains screen says how many domains are still being checked and by when all of them are checked again, and each row says when that domain is checked next. Domains waiting for approval or a brand review are checked once that is done.
- A domain that is never connected is dropped after 14 days.
- Nameservers: once the DNS checks pass, the certificate follows, usually within minutes. Until then the domain shows nothing. Most domains go live within an hour of the change; some registries take up to 48 hours.
- CNAME records: the domain shows Ready — now point www once its certificate is ready, and Live once
wwwpoints at us. - Check now on the domain row asks for a check straight away. Live rows with nothing to do, rows being set up, rows waiting for approval or a brand review, suspended rows and rows with a certificate problem have no Check now, because a DNS check can't change them.
- Each row that still has to be pointed at us, or whose records need a fix, has the steps for its registrar in place (for example Steps for GoDaddy), with a link to the registrar's domain list. Where the registrar can change many domains at once, the steps say how. Rows waiting for approval read (after approval); rows under review have no steps, because there is nothing to do. Until we know how a domain is connected, its row follows the tab you have open: nameserver steps on Change nameservers, CNAME steps on Keep my DNS host (CNAME records).
Statuses
Each domain row shows a status chip:
| Chip | What it means |
|---|---|
| Waiting for DNS | We have not seen your nameservers or records yet. The row says what to set and when we check next. |
| Waiting for approval | Added while your access request is under review. Switch it only after the approval email. |
| Under review | The name looks like a well-known brand, so we check it before it goes live. Nothing to do. |
| Setting up | DNS is right; we are getting the domain's security certificate, usually a few minutes. |
| Ready — now point www | CNAME mode: the certificate is ready. Add the www record so visitors reach us. |
| Live | Visits are being sent to ads. |
| Live — needs a fix | It works, but a record needs a fix; the row says which. |
| Needs a fix | Something at your registrar or DNS host must change; the row says what. |
| Not approved | Your parking access request was not approved. Update it on the Domain parking page and send it again. |
| Turned off | Domain parking is turned off for your account, so the domain is offline. |
| Certificate problem | Getting the certificate failed. We are on it. |
| Suspended | We suspended the domain, so it shows no ads and earns nothing. Contact us if you did not expect this. |
| No longer parked | Its DNS no longer points to us. |
| Expired | We never saw its DNS point to us within 14 days. |
Status messages
Under the chip, each row shows one status message when something needs your attention.
| Message | What to do |
|---|---|
| Waiting for approval | We will email you when your account is approved. Switch the nameservers only after that. |
| Parking access was not approved | Update your access request on the Domain parking page and send it again. |
| Parking is turned off | Write to us if you have questions. To use the domain elsewhere, change its nameservers back at your registrar. |
| Under review | The name looks like a well-known brand, so we check it before it goes live. Nothing to do. |
| Still on the old nameservers | Change the nameservers at your registrar to the two names we gave you. |
| Nameservers are mixed | Use exactly our two nameservers and remove all others. |
| Points to another portfolio | The nameservers belong to another portfolio. Use this portfolio's two nameservers. |
| DNSSEC is on | Remove the DS record (turn off DNSSEC) at your registrar. |
| Forwarding is on | Turn off URL forwarding at your registrar. |
| Validation record missing | Put the _acme-challenge CNAME record back and keep it for as long as the domain is parked. |
| Traffic record missing | Point www (and the apex, if your DNS host allows it) to the edge name we gave you. |
| Proxy is on | Set the records to DNS only (no proxy) at your DNS host. In Cloudflare, click the orange cloud so it turns grey. |
| Certificate blocked by CAA | Add a CAA record that allows letsencrypt.org, or remove your CAA records. |
| Certificate delayed | Nothing to do; we retry automatically. |
| Certificate failed | We are looking into it. Nothing to do for now. |
| No longer parked | Set the records again, then add the domain again on the Connect domains screen. |
If a domain that is live (or being set up) shows one of these messages, fix it soon: most of them make the domain leave parking after our next daily check, and the row says so. A suspended domain says first that it is suspended, and any record problem we found comes on a second line.
Found domains
If you set a domain's nameservers to your portfolio's pair but never added the domain here, it shows nothing and earns nothing. When our checks see this, the portfolio's Connect domains window shows a card: Found: example.com is pointed at this portfolio. Add it? It can take some hours to appear, and only someone actually visiting the domain makes it appear.
- Add does the same as pasting the domain into Add your domains, with the same checks. If the domain can't be added, the reason shows on the card.
- Dismiss hides the domain for this portfolio for good. You can still add it by hand later.
- We email you at most once a day per portfolio, only when there is something new to list.
Only add domains you own. Your nameserver names are public, so anyone can point a domain at them. We never add or switch on a found domain by ourselves, and a domain that points at your nameservers earns nothing and does nothing until you add it. If you don't recognize one, dismiss it.
On the Domain parking page, a portfolio with found domains shows a small N found badge; it opens the same window.
A card goes away by itself when the domain stops pointing at this portfolio, when you add it to this portfolio, or when it goes live in another one. A domain you removed isn't offered again for 30 days. Domains we would hold for review because they look like a well-known brand, and domains we suspended, are never offered. You see no cards while your access is under review or revoked, while new terms wait for you to accept them, or while the portfolio is paused.
Tags
Tags are your own labels for grouping domains, such as "Travel" or "Spring batch". They are for you: visitors never see them.
- Tag while you add. In Add your domains, type names in Tags (optional) and press Enter. Every domain in that list gets them.
- Tag domains you already have. Tick the boxes in the table, then choose Add tags or Remove tags. To change every domain that matches your search or filter, tick the page, then choose "Select all" with the number of domains followed by "matching".
- Find them again. Use the Tag filter above the table. No tag lists the domains that have none.
- Rename or delete. Manage tags lets you rename a tag, give it a default topic, or delete it. Deleting a tag only takes the label off; your domains stay.
- A domain can have up to 20 tags, and you can have up to 500 tags.
A tag can also set a default topic for ad matching. A domain's own topic wins, then its tag's, then the portfolio's. Tags are the same in every portfolio you have. Reports can group and filter by tag: see Reports.
Registrar guides
Find your registrar:
- Cloudflare
- Dynadot
- GoDaddy
- Hostinger
- IONOS
- Name.com
- Namecheap
- NameSilo
- OVHcloud
- Porkbun
- Spaceship
- Squarespace Domains
- Other registrars
Registrars change their menus from time to time. If a step looks different, look for Nameservers or DNS in the domain's settings.
Cloudflare
Domains bought at Cloudflare (Cloudflare Registrar) must keep Cloudflare's nameservers, so use CNAME records. Do not change the nameservers. If you only use Cloudflare for DNS and bought the domain somewhere else, you can either add the CNAME records here, or change the nameservers at the company you bought it from (see its guide in Registrar guides).
- Open the domain, then DNS → Records.
- Add the two
_acme-challengerecords from CNAME records: Add record, Type CNAME, Name_acme-challenge.www(then_acme-challenge), Target the value shown on the Keep my DNS host (CNAME records) tab in Connect domains. - Click the orange cloud under Proxy status so it turns grey (DNS only), then Save. Do this on every record.
- When the domain shows Ready — now point www, add (or edit) the
wwwCNAME record, and a CNAME with Name@for the bare domain. Cloudflare flattens the@CNAME by itself. Both grey, DNS only. - Remove any Page Rules, Redirect Rules or forwarding on the domain.
DNSSEC and email can stay as they are in CNAME mode.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
Dynadot
- Nameservers, many domains: My Domains → Manage Domains, tick the domains, then Bulk Action → DNS Settings → Name Servers. Look for Save Name Server.
- Nameservers, one domain: open the domain and look for Name Servers in its DNS settings.
- CNAME records: DNS Settings → Dynadot DNS, then add the records from CNAME records.
- Look for an apex ALIAS option. If there is none, forward the bare domain to
https://www.<your domain>. - Turn off DNSSEC and forwarding in the domain's settings before you switch.
For the two names, see Nameservers (NS mode).
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
GoDaddy
- Before switching nameservers: turn off DNSSEC under DNS → DNSSEC, and turn off forwarding on the domain's Forwarding page.
- Nameservers, many domains: Domain Portfolio → tick the domains → Nameservers → Set Nameservers → "I'll use my own nameservers", enter both names, then Save.
- Nameservers, one domain: open the domain → DNS → Nameservers → Change Nameservers → "I'll use my own nameservers", enter both names, then Save. See Nameservers (NS mode).
- CNAME records: open the domain → DNS → Add New Record, then add the records from CNAME records. GoDaddy already has a
wwwrecord pointing to@: edit it (pencil icon) instead of adding a second one. GoDaddy has no apex ALIAS, so use Forwarding to send the bare domain tohttps://www.<your domain>; that is the one forwarding you keep.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
Hostinger
- Nameservers: one domain at a time. Domains → Manage → DNS / Nameservers → Change Nameservers, enter the two names, then Save. See Nameservers (NS mode).
- CNAME records: DNS / Nameservers, then add the records from CNAME records.
- Look for an apex ALIAS option. If there is none, forward the bare domain to
https://www.<your domain>. - Look for DNSSEC in the domain's settings, and turn it off before you switch.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
IONOS
- Nameservers: one domain at a time. Domains & SSL → the gear icon by the domain → Name Server → Use custom name servers, enter the two names, then Save. See Nameservers (NS mode).
- CNAME records: open the domain → DNS → Add record, then add the records from CNAME records.
- There is no apex ALIAS: forward the bare domain to
https://www.<your domain>. - Look for DNSSEC in the domain's DNS settings, and turn it off before you switch.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
Name.com
- Nameservers, many domains: My Domains → tick the domains → look for Nameservers.
- Nameservers, one domain: Manage Nameservers. See Nameservers (NS mode).
- CNAME records: Manage DNS Records, then add the records from CNAME records. Use an ANAME record for the bare domain.
- Look for DNSSEC Management and turn DNSSEC off. Forwarding is under URL Forwarding.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
Namecheap
- Before switching nameservers: turn off DNSSEC under Advanced DNS → DNSSEC, and remove any URL Redirect Record.
- Nameservers, many domains: Domain List → tick the domains → look for Change Nameservers above the list → Custom DNS, enter both names, then save. See Nameservers (NS mode).
- Nameservers, one domain: Domain List → Manage next to the domain → Nameservers → choose Custom DNS, enter both names, then click the green check.
- CNAME records: Advanced DNS → Add New Record → CNAME Record, then add the records from CNAME records. Namecheap adds a
wwwCNAME and a URL Redirect Record for@to new domains: edit thewwwrecord and delete the redirect, then use an ALIAS Record for@.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
NameSilo
- Nameservers, many domains: Domain Manager → tick the domains → Change Nameservers → Submit. See Nameservers (NS mode).
- Nameservers, one domain: open the domain and look for Nameservers in its settings.
- CNAME records: open the domain → Manage DNS, then add the records from CNAME records.
- There is no apex ALIAS: forward the bare domain to
https://www.<your domain>. - Look for DS records under the domain's DNSSEC option and remove them. Forwarding is under Forwarding.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
OVHcloud
- Nameservers: one domain at a time. Web Cloud → Domain names → the domain → DNS servers tab → Modify DNS servers → your own servers, enter the two names, then Apply configuration. See Nameservers (NS mode).
- CNAME records: DNS zone tab → Add an entry, then add the records from CNAME records.
- There is no apex ALIAS: forward the bare domain to
https://www.<your domain>. - Look for DNSSEC on the domain's General information tab, and turn it off before you switch.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
Porkbun
- Nameservers, many domains: Domain Management → tick the domains → Bulk Actions → Bulk Manage → Authoritative Nameservers → Submit. The change applies at once and replaces the old nameservers.
- Nameservers, one domain: Details → Authoritative Nameservers → Edit. See Nameservers (NS mode).
- CNAME records: DNS → add the records from CNAME records. Use ALIAS for the bare domain.
- Turn off DNSSEC under Details, and turn off forwarding under URL Forwarding.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
Spaceship
- Nameservers: one domain at a time. Open the domain → Advanced DNS → look for Nameservers → Change, choose custom, and enter the two names. See Nameservers (NS mode).
- CNAME records: Advanced DNS, then add the records from CNAME records.
- Look for an apex ALIAS option. If there is none, forward the bare domain to
https://www.<your domain>. - Look for DNSSEC in Advanced DNS, and turn it off before you switch.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
Squarespace Domains
- Nameservers: one domain at a time. Domains → the domain → DNS → Domain Nameservers → Use custom nameservers, enter the two names, then Save. See Nameservers (NS mode).
- CNAME records: DNS → Custom records, then add the records from CNAME records.
- There is no apex ALIAS: forward the bare domain to
https://www.<your domain>with Domain forwarding. - Turn off DNSSEC under DNS → DNSSEC, and turn off Domain forwarding before you switch.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
Other registrars
Your registrar's name is not on this list. The steps are the same everywhere:
- Find the Nameservers setting for the domain (or DNS, then Nameservers).
- Use the two names from Nameservers (NS mode), and remove every other nameserver.
- If you cannot change nameservers, add the records from CNAME records in your DNS settings instead.
- Turn off DNSSEC and URL forwarding before you switch.
Then go back to Connect domains: each row updates by itself and turns Live once we see the change.
Next: Domain parking access.