Appearance
Parked domains
Parked domains is the placement type for domains you own but don't use for a site, such as spare or expired domains. Don't add a domain your website runs on: parking replaces what it shows. If you also run push placements, they are not affected. You point a domain at us through DNS (one settings change at the company you bought it from). Each visit to the domain gets an ad and the visitor goes straight to it. When we have no ad for a visit, the visitor goes to your fallback page instead.
Getting started
Open Domain parking in your dashboard, or choose Parked domains as the Placement type in the onboarding wizard (Choose another type takes you back). The wizard walks you through four steps: Access request (a short form that takes about a minute; we review it, usually within five business days, see Domain parking access), Portfolio (a group of domains that share one pair of nameservers, the setting you change at the company you bought a domain from, and one fallback page, what visitors see when we have no ad for them; click Create portfolio), Connect domains and Done. On a phone the wizard names the current step under the numbers. Back returns to the previous step, and the last step's button, Go to Domain parking, opens the Domain parking page; so does I'll finish setup later — take me to Domain parking. If you already have a portfolio, the Portfolio step offers it (Connect domains) and Create another portfolio. Done says You're all set once you have added domains and your account is approved; with no domains yet it says your portfolio is ready and you can add them any time. You can create a portfolio and add your domains while we review your request. Switch them (nameservers or CNAME records) only after the approval email.
On the Domain parking page, Create portfolio opens the New portfolio form and brings you back to the page when you close it or create the portfolio. Once your account is approved the page reads Domain parking is approved, with how many domains are live, pending (waiting for DNS or for us) and need attention, the same groups as the table and Connect domains, and the next step (create a portfolio, add domains to one, or open Connect domains to see what each domain needs). Click a portfolio's name or Connect domains to open its domains; closing that window brings you back. On a phone each portfolio shows its counts (groups with no domains are left out), its fallback page status, Connect domains and Settings under its name. See reports appears once you have a portfolio.
Portfolio settings
The New portfolio form asks for a name and a Reference website (required): any site that describes the portfolio, such as your main site or one of your domains. Visitors never see it.
- Preferred connection. Nameservers: change one setting per domain and we do the rest (simplest, and recommended). CNAME records: add a few records yourself and keep your current nameservers. We detect the method per domain, so you can use either one.
- Countries. Leave it empty to show ads to visitors everywhere. If you pick countries, visitors from other countries see your fallback page.
- Fallback page. Optional: the address of the page visitors go to when we have no ad for them. It must start with https://, and we check it for safety before we use it. Its status reads Safety check in progress (we're checking the page for safety, usually within minutes; nothing to do), Active (it passed) or Not allowed (we can't send visitors there; use a page on a different website, because a block covers the whole site). Until it is Active, and when you leave it empty, visitors see a simple parked page. A portfolio whose fallback page is Not allowed is also listed above the table with its own Settings button. If we refuse a fallback page when you save, the reason shows under Fallback page. To change a portfolio's settings, choose Settings on its row on the Domain parking page, or Settings in its row menu on Placements.
Deleting a portfolio
A portfolio can only be deleted once its domains are removed. If it still has domains, open Connect domains on it and choose Remove in each domain's ⋮ menu, then delete the portfolio.
Connect your domains
- Create a portfolio (Create portfolio on Domain parking). Its row on Placements shows how many domains are live, pending or need attention; click any of them or the placement's name, or use Connect domains from the row menu.
- The window has three steps. Add your domains: paste them into the box (one per line, or separated by commas or spaces), or upload a CSV or text file. Every domain that was not added comes back with the reason and the line you typed it on, and the list shows your new domains right after.
- Point them to us: most people choose Change nameservers (recommended): set the two nameservers we show at your registrar. They are on two different domains on purpose, so enter both, exactly as shown. Choose Keep my DNS host (CNAME records) only if your domains must stay on your current DNS host, for example Cloudflare Registrar (which cannot use other nameservers), and add the records we show. A portfolio whose Preferred connection is CNAME records opens on that tab instead. The
_acme-challengerecords are marked Keep while parked. Don't delete them, or the domain stops working. How to change nameservers at your registrar opens short generic steps, and each domain that still has to be pointed at us has Steps for its registrar (for example Steps for GoDaddy) in its row, with a link to that registrar. - Before you switch nameservers, turn off DNSSEC (this removes the DS record), turn off URL forwarding and remove any old parking nameservers. Email on the domain stops working once it is parked. With CNAME records your email and DNSSEC keep working: add the two
_acme-challengerecords first, thenwwwonce the domain shows Ready — now point www, and it never goes offline. - Watch them go live: each row shows a status and, under it, what to do next. Use Download records (CSV) for a bulk import at your registrar, or Email me these records to get them in your inbox.
If your parking access is not active (no request yet, not approved, turned off, or new terms to accept), the window shows why in place of the first two steps, with Open Domain parking. With new terms to accept, the records stay shown so domains you already added can still be pointed at us.
The groups at the top (live, pending, need attention) are buttons: click one to list only those domains, or use Show to filter the list. The list starts with the domains that need attention, then pending, then live. A group with no domains is grey. On a phone each domain's status and next step sit under its name. The line under the groups says how many domains we are still checking (pending ones and ones that need a DNS fix) and by when all of them are checked again; each row says when that domain is checked next. Domains waiting for approval or a brand review are not counted there: we start checking them after the approval or the review. A link in the records email opens the same window.
If you pointed a domain at a portfolio's nameservers without adding it, the portfolio's Connect domains window offers it to you with Add and Dismiss. See Found domains.
Domain statuses
| Status | What it means |
|---|---|
| Waiting for DNS | We have not seen your records yet. Set the nameservers (or the CNAME records) as shown. The row says when we check next. |
| Setting up | DNS is right; we are getting the domain's security certificate. Nothing to do, usually a few minutes. |
| Ready — now point www | CNAME mode: the domain is set up but visitors do not reach us yet. Add the www CNAME record. It counts as pending until then. |
| Live | Visits are being sent to ads. |
| Live — needs a fix | The domain works, but a record needs your attention; the row says which and what happens if it stays. Most problems make it stop earning after our next daily check. |
| Needs a fix | Something is wrong at your registrar or DNS host, or a record went missing while the domain was being set up; the row says what to fix. A domain being set up leaves parking after our next daily check if it stays. |
| Under review | The name looks like a well-known brand, so we check it before it goes live. Nothing to do. |
| Waiting for approval | Your parking access is still under review. Switch the domain only after the approval email. |
| Not approved | Your parking access request was not approved. Update it on the Domain parking page and send it again. |
| Turned off | Domain parking is turned off for your account, so the domain is offline. |
| Certificate problem | Getting the domain's security certificate failed. We are on it and will email you if we need anything. |
| Suspended | We suspended the domain, so it shows no ads and earns nothing. Contact us if you did not expect this. |
| No longer parked | Its DNS no longer points to us. Set the records again, then add the domain again. |
| Expired | We never saw its DNS point to us within 14 days. Set the records, then add the domain again. |
Reports use the same words for the same domain. We check pending domains regularly. Use Check now on a row to check it again; it then reads Checked just now for a minute. Rows waiting for approval or a brand review, suspended rows and rows with a certificate problem have no Check now: a DNS check can't change them.
Your domain counts
Each portfolio shows three counts, and each is a button that lists those domains:
- Live: domains sending visitors to ads now.
- Pending: domains waiting for the DNS switch, a check, approval or a certificate (including a certificate problem we are fixing).
- Need attention: domains where you need to do something: Needs a fix, Live — needs a fix, Suspended, Not approved and Turned off.
What visitors see
One of two things: an ad, or your fallback page. Every visitor we don't send to an ad (no ad available, a limit reached, the portfolio paused, a filtered visit) sees the same fallback. You can also set a fallback page for one domain, from the row's ⋮ menu on the Connect domains screen. A new fallback page shows Safety check in progress until we have checked it.
Ad matching: keywords and topic
Each visit asks for an ad that fits the domain. We send two things with each ad request:
- Keywords: words that describe the domain. We fill them in from the domain name when you add it, for example
bestcheapflights.comgetsbest cheap flights. Up to 8 words and 100 characters: letters, numbers and spaces. With no keywords we use the domain name. - Topic: the subject of the domain, from the ad industry's standard topic list (called IAB), such as Travel or Personal finance. The first choice, Automatic, uses the topic of the domain's tag, then the portfolio's topic, then our guess from the name.
Each domain shows them under its name, for example "Ad matching: best cheap flights · Travel". To change them, choose Ad matching in the domain's ⋮ menu on the Connect domains screen. When the name gives a different suggestion, Use this fills it in. A tag can give its domains a topic: see Tags. To give every domain without a topic of its own or from a tag the same one, set Topic in the portfolio's Settings. It replaces our guesses from the names.
Which visits earn
Automated traffic, known crawlers, anonymising networks and data-centre networks go to the fallback, as do visitors outside your countries and repeat visits beyond our per-visitor limits. We don't send them to ads, to protect advertisers.
Reports and payments
Parked-domain revenue shows Estimated until it is confirmed, usually within two days, then Confirmed. Your Domain payout is paid on top of your normal Push payout and outside the minimum guarantee. The whole payout waits (it shows Waiting for parked-domain revenue to be confirmed, and a note above the table says how many days are still being confirmed) until every parking day in the period is confirmed, usually within 2 days. Their revenue is then added to the payout, so the amount you see while it waits can still grow; then it goes through approval and payment as usual. If confirming runs late, the note says so: your payout is safe and is paid in full once the figures arrive.
Details are on How payments work.